by Antony Joseph Nixon · Published October 10, 2022 · Last modified October 20, 2022
Introduction Piping Stress Analysis is commonly performed in various industries like Nuclear, Power, Oil & Gas and Process. This conventional analysis is simulated in computer-based software to analyse the effect of piping expansion on...
Architecture / Construction / Design / Metals
by Sayak Banerjee, Sanjoy Chowdhury
by Sayak Banerjee, Sanjoy Chowdhury · Published August 4, 2022 · Last modified October 20, 2022
Structural steel is widely preferred by engineers because of its strength, ductility, availability, ease of fabrication to the desired geometry, quick erection, and reusability. Beautifully designed and aesthetically pleasing buildings, memorials, bridges, towers etc...
by Atul Choudhari · Published December 15, 2021 · Last modified October 20, 2022
Hydrogen is considered a clean energy carrier; however, it has low density at ambient conditions, making its storage a challenging task. Several technological options are being considered for hydrogen energy storage. The possibilities for...
Chemicals / Hydrogen / Tech Stories
by Dr S Sakthivel · Published October 6, 2021 · Last modified October 20, 2022
Hydrogen (H2) is stated as sustainable alternative energy to fossil fuels, especially in e-transport, the source of industrial energy and feedstock, and medium for energy storage. Generally, hydrogen is produced (about 96%) from fossil...
by Atul Choudhari · Published October 5, 2021 · Last modified October 20, 2022
Using “Process Simulation” tools is the most fancied and a dream activity amongst practising process engineers. It is treated as the whitest of the white-collar jobs. The brightest engineers are selected for carrying out...
by Lakshmana Rao · Published August 24, 2021 · Last modified October 20, 2022
The Indian power sector is going through a transformation phase and primarily focusing on green power generation. The majority of the Indian power generation comes from the coal fired plants designed for base load...
In a typical power plant, various instruments are used for measurement and control. The traditional method of connecting the signals to the central control room is by wiring (using cables) from instruments to the...
by Saswata Mandal · Published August 19, 2021 · Last modified August 24, 2021
Level-5 automation architecture is a very well-known terminology in the world of automation. With ISA-95, it is found that most facilities of process industries have achieved almost complete automated production process, where assets are...
by TCETechSpeak Team · Published April 1, 2014 · Last modified August 19, 2021
This is an open forum to exchange technology-related ideas and thoughts, discuss challenges and share knowledge on a host of topics that is relevant to the field of engineering. Our technology experts have helped to compile...
by Atul Choudhari · Published January 4, 2020 · Last modified September 28, 2021
Accident at Pemex LPG terminal in Mexico City in 1984 is one of the worst disasters that the industry has seen. The facility owned by the government was a conventional large scale (54 storage...
More:
