Enter the Future: Robotic Gallery, Science City, Ahmedabad
The prestigious Robotic gallery is an iconic project, first ever of its kind in India. A world class facility to educate the people in the field of robotics and provide the young brains a...
Tech Speak - Tata Consulting Engineers' Blog Blog
Dynamic Study of Integrated Steam Systems in a Large Process Plant
Combined heat and power plant which is generally referred as cogeneration-plant produce both power and steam is installed to meet process plant requirements. Any change of demand in either power or steam would affect...
Drive Selection For Boiler Feed Pumps
Coal fired utility power generation plants are primarily designed as base load units in India. In order to meet the load demand of future industrial growth large capacity power plants with super / ultrasuper...
Designing Blast Furnace Four Poster Structure – A Leap Forward by TCE
TCE has developed the skill and capability of designing the massive Four poster structure for Blast furnace capacity of about 4500 m3. Design of Four poster structure hitherto a domain of the Blast furnace...
Blast Resistant Design of Structures
Industrial process plants handling hydrocarbons and other fuels have experienced accidental explosions. Care is taken to minimize explosions in the plant design, however when such incidents occur; the consequences can be very severe involving...
Integration of Renewable Sources of Electrical Power with Grid
The huge, ever growing demand for electrical energy has hitherto been primarily met through the combustion of fossil fuels, and conversion of heat liberated therefrom. The relentless exploitation of these non-renewable resources has raised...
Failure Modes and Effects Analysis (FMEA) as a Reliable Tool for Sustained Operations
In today’s world, ensuring plant reliability & availability is the key to sustain industries. Good news is, informed plant owners / O&M contractors are therefore today commissioning FMEA based Single Point of Failure (SPoF)...
Structural Distress in Existing Plant and Study for Remedial Action
Introduction Plant structures are designed and constructed to resist loads envisaged to be carried based on its function and local environmental conditions. Additional requirement for the desired durability of the various structural elements are...
Restoration of a Distressed Tailing Dam
Introduction Handling and management of tailings from a process plant is always a tricky and sometimes neglected part of engineering and operation. The tailings in mineral and ore processing plants contain some quantity of...
Captive Co-generation Plants: Selection of optimum configuration – Key to Success
Large process plants typically demand both power and process steam at multiple pressure levels. While power demand can be met by either in-house generation or from grid or in combination of both, process steam...
